Drywall Nails

Filter

Drywall nails are used for the installation of drywall and plasterboards. These nails feature a cupped head that disappears into the sheetrock for a smooth finish, excellent corrosion resistance and lubrication.

APPROVED VENDOR -

Drywall Nails

StyleModelLengthPackage WeightPrice (inc. GST)
A4NEZ41.5"1 Lbs.A$ 16.99
A4NEZ61.5"5 Lbs.A$ 62.01
A4NEZ31.375"1 Lbs.A$ 16.99
A4NEZ51.375"5 Lbs.A$ 62.01

Drywall Nails

Drywall nails are used for the installation of drywall and plasterboards. These nails feature a cupped head that disappears into the sheetrock for a smooth finish, excellent corrosion resistance and lubrication.

Features

  • Drywall nails come with a ringed or barbed shank that provides superior holding power.

Frequently Asked Questions

What are the advantages of drywall nails?

  • These nails work well under pressure, making them suitable for challenging jobs requiring more weight.
  • They are more affordable than screws.
  • Drywall nails are much less likely to break than screws while experiencing shear force.
  • They are quicker to install than screws.

How to fix nail pops in drywall?

  • Wear safety glasses and use a hammer to drive the protruding nail back into the wall.
  • Secure the drywall to wooden studs with two drywall screws. Position one screw directly above the nail and one screw directly below the nail.
  • Use a drywall taping knife to apply a light layer of joint compound over the holes.
  • Permit the joint compound to dry for 2 to 4 hours. Turn On a fan to speed up the drying process.
  • Add a second coat of joint compound. If the patch is not blending well with the surrounding wall, use a broad feathering knife to draw a wide & thin coat farther out on the wall.
  • After inspecting the area and checking for the joint compound shrinkage (while drying), apply a third coat. Sand the area lightly using fine-grit sandpaper. Paint the surface after applying primer to the repair area.

We are here to help!

Looking for a part not listed here?