BURNDY Mechanical Connectors

Aluminium / copper / bronze / steel connectors used to connect a wire or a cable to a terminal in an electrical circuit. Feature slotted / hex heads for easy installation and are available in different minimum & maximum conductor sizes

Burndy mechanical grounding connectors are ideal for ground electrical installations and have a maximum of 2 gauge AWG conductor size for increased current potential & flexibility. They feature copper alloy construction to ensure excellent electrical & thermal conductivity and are equipped with a flexible rubber sheath cable that works well as an electrical appliance, as well as provide abrasion resistance. Variants are available in widths of 3 and 5 inches. Raptor Supplies also offers Burndy Cable tray ground clamps with ribbed neck to prevent rotation during installations.

Burndy GAR Series mechanical grounding connectors are used for attaching cables perpendicular or parallel to pipes, tubes or rods. They feature copper alloy construction to provide radio frequency shielding and corrosion resistance. These UL listed connectors can be installed using one wrench and include U-bolts, lockwashers & nuts, allowing the entire connection to be buried under concrete surfaces. They are integrated with cable clamp swivels for grounding one pipe or several pipes at 90 degrees, and are available in lengths ranging from 2 to 8 inches.
Raptor Supplies also offers Burndy grounding & bonding connectors including mechanical and compression accessories.

Burndy Series GAR-TC water pipe ground connectors are used for smooth connection & direct burial of water pipes to ground clamps through a two hole compression terminal. They are also used for reinforcing or providing a structural change to rod shapes. They have pre-drilled mounting pads to withstand shock and vibration, as well as provide maximum flexibility. These NEC approved and UL listed connectors can be installed with one wrench and feature silicon bronze construction for heat generation reduction during welding processes, thereby minimising distortions. Variants are available in lengths of 3, 4, 6 & 8 inches.
Raptor Supplies also offers Burndy ground clamps featuring tin-plated copper alloy construction.

Burndy insulated multitap connectors are designed to connect wires of various sizes and materials. They are made from aluminium for conducting current and covered with UV-resistant plastisol for insulation & current leakage prevention. These Burndy connectors are equipped with aluminium set screws for holding wires in place and end caps for preventing contamination. They are available in 2, 3 & 4 port configurations.
Raptor Supplies also offers a wide range of Burndy stacking adaptor mechanical connectors in tin-plated steel & aluminium screw variants.

BURNDY Durium Series ground clamps are used in electrical grounding applications to enhance safety by diverting electrical currents from sensitive equipment and personnel. They are used in telecommunications, construction and utility sectors to establish reliable connections between grounding conductors and structures like pipes, rods or fences. These ground clamps allow 3-gang / 8 inch hex / bolt / stud size configuration for secure and easy installation. They are designed to accommodate main / primary conductors with sizes ranging from 8 to 4 AWG. These ground clamps have the capacity to accept 1 or 2 ground conductors, reducing the need for additional connectors during installation. They offer an impressive low-impedance maintain stable connections, minimising signal interference and enhancing the overall effectiveness of the grounding system.

Burndy one conductor lugs are suitable for connecting electrical devices and cables. These lugs are manufactured using superior strength aluminium alloy, electro tin-plated to offer low contact resistance. Choose from a broad range of these one conductor lugs, available in 600 kcmil and 800 kcmil conducter sizes.
Raptor Supplies also offers Burndy stacking adaptor mechanical connectors to allow standard terminals to be stacked on two or four holes.

Burndy GD Series ground connectors are suitable for connecting two parallel cables to rods / tubes. They are ideal for grounding fence posts. These UL-listed units can be buried under earth or concrete with just one wrench. They have high-copper alloy cast bodies for excellent conductivity.

Burndy GAR Series ground connectors are designed for joining a variety of cables to a rod or tube in parallel or at right angle direction. These UL-listed connectors feature a copper alloy cast body and Durium Silicon bronze hardware including U-bolts, nuts and lock washers, to allow easy installation of connectors to the ground or concrete without the risk of corrosion. They are designed to accommodate copper conductor (rod) sizes ranging from 8 to 3 AWG (solid) and 9 to 4 AWG (stranded), respectively.

Burndy three lug connectors are suitable for connecting or terminating cables / wires for use in aluminium and copper conductors. These universal terminal connectors are made of electro tin-plated aluminium alloy to offer low contact resistance and excellent thermal protection. Choose from a wide range of these UL-listed units in 5/16, 3/8 and 1/2 inch stud sizes. Raptor Supplies also offers Burndy terminal mechanical lugs in copper and tin-plated aluminium variants.