TEXAS PNEUMATIC TOOLS Parts

Texas Pneumatic Tools easy change retainers provide a solid chuck that securely grips bits in the barrel of an air-powered hammer, while allowing tool-free bit changes. They are suitable for fast and simple attachment / removal of the chisel. These units allow quick replacement by releasing the upper release ring.

Texas Pneumatic Tools backhead assemblies feature adjustable ends to connect to the source of pressurised fluids. They have distilled ends with reciprocating bits to control to strike the workpieces while using maximum forces. These backheads are connected with hollow wear sleeves by threaded connections that extend the distal ends to form an exterior shank or surface of the machine. Choose from a wide range of these assemblies, also available in push & lever type backhead assembly variants.

Texas Pneumatic Tools bolts & nuts are suitable replacements used for fastening components together in paving breaker & chipping hammer tools. Selected bolts feature hex head design for enabling easy installation & fastening and black oxide finish for high abrasion resistance.

Texas Pneumatic Tools air inlet screens provide long-lasting, weather-resistant & easy-clean external mesh filters to fit air handling units, blowers, fans, dry air coolers and air conditioning units. They stop debris such as pollen, leaves, insects, litter or other air contaminants from entering through the air inlets and clogging coils and internal components of the electrical equipment.

Texas Pneumatic Tools bolt retainers are designed to keep bolts & screws in place, in HVAC, automotive, construction and electrical applications. They feature a one-piece design to eliminate the need for multiple small parts, thereby reducing inventory space. They have inner teeth that bite onto the bolts or screws to ensure a secure, vibration-free connection.

Texas Pneumatic Tools lock nuts keep the fasteners from loosening under constant vibration, excessive pressure or torque. These nuts firmly grasp the bolt threads and provide extra friction to resist unwinding and are also called reversible lock nuts as they can be fastened on the bolt from either side. Some of the lock nuts are hex shaped with higher torque capabilities and are specifically designed for parts exposed to excessive jerks.

Clamping screws from Texas Pneumatic Tools feature a full ball point contact for workpiece fixing and positioning. These screws feature threads in the form of a helix to allow transmission of lateral movement along the axis of the screw.

Texas Pneumatic Tools forehead bolts are used for securely bolting the front head to the lower portion of the cylinder in paving breakers. These replacement bolts create a strong clamping force with the combination of nuts and provide extra friction to resist unwinding (self-loosening) due to external forces. Selected models come with a nut and washer assembly for equally distributing the load of the bolt and dampening shocks & vibrations.

Texas Pneumatic Tools rubber bumpers are used in stretchers and vehicles for shock absorption, cushioning and edge protection of internal machines. They usually feature a circular shape, which may or may not have a small hole in the centre. These bumpers also protect floors against damage caused by machines & equipment.

Texas Pneumatic Tools ratchet rings are used to hold components onto a shaft or into a bore. These ratchet rings feature chrome vanadium steel construction to offer high resistance to corrosion. They have a high strength design with smooth finish to reduce fouling and stagnation.

Texas Pneumatic Tools exhaust air deflectors redirect the exhaust air in engines, motors, vents and other HVACs to protect objects & equipment. They have a single-piece housing with an opening to deflect exhaust air from the direction of its natural flow.

Texas Pneumatic Tools needle drivers are suitable replacements for worn out drivers in scaling hammers used for cleaning castings, welding slags and de rusting metals. They feature one piece construction for resisting bending / breaking while ensuring long term operation.

Texas Pneumatic Tools rivet buster bumpers prevent wear of retainer sleeves and are ideal for extending the life of jumbo shank tools.

Texas Pneumatic Tools blow tubes offer a medium through which air or gas can be blown to concentrate heat. These blow tubes feature a rough interior surface to reduce condensation build-up. They are available in both rigid & flexible variants.

Texas Pneumatic Tools snap handles are used as attachments for floating equipment used in concrete finishing projects. These snap handles feature an ergonomic grip that increases comfort and control. They come with a lever throttle for additional safety.

Texas Pneumatic Tools air inlet swivels allow regulator hoses to move smoothly and align with mask inlets without putting any stress on the hose couplings. They can also be used with second stage scuba regulators and prevent twisting, stretching, bending or kinking.

Texas Pneumatic Tools locks are ideal for securing the connection in pneumatic tools, such as chipping hammers, rock drills and riveting busters. They are designed to provide protection against heavy vibrational forces.

Texas Pneumatic Tools retainers provide a friction fit to hold chisels on an air-powered hammer. They feature a solid chuck design that securely grips bits into the barrel of an air-powered hammer while allowing tool-free bit changes. They thread onto the hammer barrel and have a spring-loaded collar that slides back to release the bits.

Texas Pneumatic Tools push pins are short pins having a spool-shaped head made of glass / metal / plastic. They are used for affixing materials to a wall or bulletin board.

Texas Pneumatic Tools jumbo retainers are used for holding foam organs and gauze pads in place, within FLS trainers.

Texas Pneumatic Tools replacement backheads provide a clear passage to circulate air (while cleaning the drilled rock hole). This is done to prevent any damage to the internal components of the rock drilling drifter. Selected models come with bushings (for dry / wet applications) and snap- or push-type fittings.

Texas Pneumatic Tools locking clips prevent dropping of workpieces or slippage & dislocation of mated shafts when subjected to external forces like temperature variations or vibrations.

Texas Pneumatic Tools backhead bolts offer strong clamping force with the combination of nuts to create a strong bolted joint between the backhead and the driver chunk in tools like hammer drill. These units come with hexagonal heads that can be rotated from any angle for loosening or tightening in tight spaces with the help of a wrench. When mated with the compatible nuts, these bolts provide extra friction to resist unwinding due to external forces. Selected models come with nut and washer assembly for equally distributing the load of bolt and preventing self loosening due to vibrational effects.

Texas Pneumatic Tools center plates fit in between the upper and lower valve blocks in a backfill tamper tool to provide support and allow rotary movement with respect to the body of the tool.

Texas Pneumatic Tools needle springs are suitable replacements for worn out springs in scaling hammers used for cleaning castings, welding slags and de rusting metals. They have one piece construction that offers durability and prevents the spring from loosing tension over time.

Texas Pneumatic Tools square head plugs attach at the ends of pipes, shafts, tubes or connectors and provide safety in high-pressure air, water and natural gas systems. These threaded square plugs are made of high-quality metal for a steady performance and high thermal resistance. They further feature a galvanised zinc plating for rust protection and a simple design that requires little maintenance. Raptor Supplies offers an array of these hydraulic plugs in 1/4, 3/4, 3/8 and 1 inch sizes.

Texas Pneumatic Tools corrosion-resistant, galvanised pipe nipples are ideal for connecting two male or female fittings and transfer water, air, oil, steam or natural gas in low-pressure plumbing applications. They are configured with thread connections to provide an excellent watertight seal when connecting piping to other fittings, equipment or valves and are available in thread sizes of 1-1/2, 1/2, 3/4 and 1 inches.