Utility/Dewatering Pumps

Filter

Utility / dewatering pumps are used to remove or level the water table from mines, basements and backyards by the method of centrifugation. These pumps feature an impeller which creates a vortex to... Read More

DAYTON -

Plug In Utility Pumps, Stainless Steel Base

Dayton plug-in utility pumps are used for draining excess rainwater from window wells & stairwells, and removing standing water from yards & flooded basements. These pumps feature a stainless steel base for structural rigidity and 3-conductor SJTOW cords that are resistant to oil & water. They are integrated with dual ball bearings for less rotational friction while running at a maximum speed of 3450 rpm. These dewatering pumps are capable of withstanding liquid temperatures up to 104 degrees F.

StyleModelAmpsDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadGPM of Water @ 30 Ft. of HeadGPM of Water @ 5 Ft. of HeadPrice (inc. GST)
A11C6853.25.625"158---21A$ 537.23
B11C6867.56.5"59452916476A$ 534.45
B11C68711.46.5"64493117583A$ 618.25
DAYTON -

Plug In Utility / Dewatering Pumps

Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.

StyleModelAmpsBase MaterialCord LengthDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadPrice (inc. GST)
A3YU541.5 ACPolypropylene10ft.6"116--A$ 232.22
A3YU552.6 ACPolypropylene10ft.6"2314.25-A$ 294.17
B1XHV44.7 AC304 SS20ft.9.125"64514027A$ 1519.43
B1XHV511.3 AC304 SS20ft.10.375"82696153A$ 2545.92
TSURUMI -

Construction Site/Residential Dewatering Pump

StyleModelAmpsBase MaterialCord LengthCord SizeDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadPrice (inc. GST)
AHS2.4S-625.4 ACPVC20ft.16/310 1/16"464035A$ 1067.01
BHSZ2.4S-625.4 ACPVC20ft.16/313.5"464035A$ 1197.78
CLB-4806.1Steel32ft.16/37.375"575044A$ 1241.50
DLSR2.4S-606.1Rubber32ft.16/38.25"575044A$ 1583.78
EHSD2.55S-627.5Steel32ft.16/39.75"524740A$ 2244.04
FHS3.75S-629.6PVC32ft.14/312.437"605955A$ 1980.57
GHSZ3.75S-619.6PVC32ft.14/313.5"605955A$ 2059.90
HNK2-2213Steel32ft.14/39.437"126120114A$ 7672.02
INK2-22L13Steel32ft.14/39.25"200188180A$ 8747.49
TSURUMI -

Submersible Dewatering Pump

StyleModelAmpsCord SizeDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadGPM of Water @ 30 Ft. of HeadPrice (inc. GST)
ALB-8009.614/37 9/16"7772676053A$ 2104.31
BLB-150026.212/37.375"108104969084A$ 6731.14
TSURUMI -

Automatic Submersible Dewatering Pump

StyleModelAmpsCord LengthCord SizeGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadGPM of Water @ 30 Ft. of HeadPrice (inc. GST)
ALB-480A6.132ft.16/35750443623A$ 1777.40
BLB-800A9.650ft.14/37772676053A$ 2764.53
LITTLE GIANT PUMPS -

Submersible Sump Pumps, Ball Bearings, 20 Feet Cord Length

Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in the basement or crawl space and transfer water to the sewer line. These units come with stainless steel housing for handling corrosive fluids and semi-open impeller design for handling liquids with solid particles. They are completely submerged underwater and start operating the motor automatically when the sump pit water rises to an emergency level and stops the pump when the water has drained down to normal level. Choose from a wide range of these submersible sump pumps, available in 12 and 14 inch heights.

StyleModelAmpsCord SizeDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadGPM of Water @ 30 Ft. of HeadPrice (inc. GST)
A6202405 AC16/37 5/16"5449423422A$ 1564.35
B62024110 AC14/37.25"7671686054A$ 1988.14
LITTLE GIANT PUMPS -

Dewatering/Utility Pumps

StyleModelAmpsCord LengthGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 5 Ft. of HeadHeightItemPrice (inc. GST)
A505300-10ft.1000-5201100-PumpA$ 408.60
B505350518ft.10008408.711007.75"PumpA$ 455.39
C5054005 AC10ft.16.7148.718.38.5"Submersible Utility PumpA$ 396.78
LITTLE GIANT PUMPS -

Pony Pumps

StyleModelPrice (inc. GST)
A555110-
RFQ
B555111-
RFQ
A555113A$ 280.62
B555203-
RFQ
A555112A$ 419.44
C555602-
RFQ
DAYTON -

Utility Pumps

StyleModelBody MaterialGPM of Water @ 10 Ft. of HeadGPM of Water @ 5 Ft. of HeadHeightHPMax. Liquid Temp.Motor EnclosureMotor TypePrice (inc. GST)
A2VAN7-223011.75"1/4104 Degrees FTEFCPSCA$ 376.10
B4LA43--------A$ 3508.42
B4LA45--------A$ 2514.10
C5UXL8Nickel-Plated Brass3.323.724.187"1/10140 FOpenDCA$ 284.26
C5UXN0Stainless Steel3.323.724.187"1/10140 FOpenDCA$ 325.35
ZOELLER -

Utility Pumps

StyleModelAmpsGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadGPM of Water @ 5 Ft. of HeadHeightHousing MaterialPrice (inc. GST)
A46-00056 AC47362555514.5"PlasticA$ 992.86
B314-00028.022.52221.521238"Cast ironA$ 1220.99
LITTLE GIANT PUMPS -

Utility Pumps

StyleModelPrice (inc. GST)
A505714A$ 529.66
A505712A$ 405.07
B505715A$ 571.20
C505723A$ 423.50
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
2DW1012CP6PRXA$ 4709.00
FLOTEC -

Utility Pump, Water Removal, 12V DC, FP0FDC

ModelItemPrice (inc. GST)
FP0FDCCP6CAAA$ 594.53
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51C3EACP6PQGA$ 2609.69
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51C0EACP6PRMA$ 2501.51
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51C1EACP6PRNA$ 2501.51
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51D1EACP6PRPA$ 3150.75
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51D3EACP6PRQA$ 2828.07
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51E1EACP6PRRA$ 3130.36
GOULDS WATER TECHNOLOGY -

Plug-In Utility Pump

ModelItemPrice (inc. GST)
1DW51E3EACP6PRTA$ 3019.65
FLOTEC -

Utility Pump, 115V, 1/6HP, FP0S1300X

ModelItemPrice (inc. GST)
FP0S1300XCP6BZZ-
RFQ

Utility/Dewatering Pumps

Dewatering pumps are used to remove or draw groundwater from mines, basement and backyard, as well as reduce flooding by the method of centrifugation and level the water table. Raptor Supplies offers a wide range of these utility / dewatering pumps from brands like Allegro, Dayton, Little Giant Pumps, Tsurumi and Rule. These pumps feature an impeller which creates a vortex to suck the air out of the hose and, as a result, forces the water to rise to the pump with the help of atmospheric pressure. These horizontally installed pumps use electric motors with a maximum 3 HP power rating and come with a mechanical seal to prevent water ingress. These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.

Features

Allegro Dewatering Pumps :

  • Allegro Safety dewatering pumps are equipped with a semi-vortex impeller made of urethane rubber with an ethylene propylene rubber casing for lightweight and efficient pumping and handling of sludge, even in challenging environments.
  • They feature double inside mechanical seals with silicon carbide faces providing a reliable and secure seal between the impeller and the shaft for leakproof connection.
  • These sludge dewatering pumps utilise a 403 stainless steel sleeve shaft for excellent strength, corrosion resistance and durability.
  • They further feature C3 ball bearings to withstand high temperatures and provide a long B-10 life of 60000 hours, ensuring smooth and reliable operation.
  • These dewatering pumps have NBR (Nitrile Buna Rubber) elastomers which provide excellent resistance to oil, fuel and other chemicals ensuring a tight and reliable seal, enhancing the overall performance and durability of the pumps.

Dayton Utility / Dewatering Pumps :

  • Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present.
  • They feature stainless steel / polypropylene construction to resist chemicals & moisture, ensuring long service life.
  • These pumps are equipped with double ball bearings to bear radial & axial loads in both directions and are available in cord lengths of 10 & 20 feet.

Tsurumi Submersible Dewatering Pumps :

  • Tsurumi submersible dewatering pumps are constructed with a durable steel base material, ensuring strength and stability during operation.
  • These pumps feature a 3-conductor STOW cord that is specifically designed to resist water and oil, allowing the pump to be submerged and operated in water without compromising safety or performance.
  • They are designed for continuous duty operation allowing them to run continuously without the need for frequent stops or cool-down periods, ensuring uninterrupted dewatering performance.

Frequently Asked Questions

What maintenance is required for dewatering pumps?

  • Clean the pump and hoses regularly to eliminate debris, sediment, or blockages that may hinder the pump's effectiveness.
  • Inspect the intake and discharge hoses of the pump for any indications of damage, such as cracks or leaks. Replace any impaired hoses as necessary.
  • Examine the impeller or propeller of the pump for any obstructions or signs of wear. Clean or replace the impeller if required.

Do these sludge submersible dewatering pumps offer motor protection?

Yes, Allegro Safety dewatering pumps have built-in thermal and amperage sensing protectors to prevent motor failure due to overloading or accidental run-dry conditions. This protection adds an extra layer of safety and helps prolong the lifespan of the motor.

In what cord lengths are these dewatering pumps available on Raptor Supplies?

These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.

What is the maximum liquid temperature permissible in dewatering pumps?

They can withstand liquid temperatures up to 150 degrees F.

We are here to help!

Looking for a part not listed here?